Categories: Blogs

What Do I Need To Understand About Heat Pump Installation?

A heat pump is a highly efficient device that transfers heat from one area to another. If you are looking for a heat pump installation, online, look no further than Premier Heating and Cooling. Our experts will replace air conditioners during summer and furnaces during winter. If you’re considering using a heat pump, you’ll likely be curious about how they are installed.

Points to Consider Before the Heat Pump is Installed

House Efficiency

Upgrading the insulation in your home and fixing air leaks are excellent choices before installing a heating pump. The more efficient the space in your home is, the longer you’ll be able to utilize the heat pump instead of your furnace. Doing this can also postpone the hassle of searching online for ‘heating repair near me’.

The Size of the Heat Pump

When searching online for heating contractors near me, be sure to choose a reliable contractor, so they guide you to select the best heat pump, appropriately sized for your home to ensure that it functions efficiently.

The Type of Heat Pump

There are two types of heat pumps, i.e., air source and ground source. Air source heat pumps use the outdoor air to provide heat and are less complicated to set up. The ground source heat pump (also known as geothermal) requires pipes to be inserted into the ground.

Some Things to Cconsider Regarding Indoor Heat Pump Location

Heat Rises

Although an indoor unit may bring some heat to the floor above, it will not send any warmth to the below floors. Also, cool air from the unit on the first floor in cooling mode won’t cool the floors above it.

Consider Airflow

Open rooms tend to be easier to heat and cool with an indoor unit. A room with a usually closed entrance won’t benefit from the heat pump located outside the room.

Consolidate Connections

Finding resourceful ways to streamline installation will save you money and improve the aesthetics. The exposed line sets should be covered and painted to blend with the walls to minimize exposed wiring and tubing.

The Heat Pump's Outdoor Unit Placement

Mounting

The most important goal of mounting systems is to keep the outdoor unit out of the snow.

Foundation brackets do a great job of reducing noise while keeping clear of shovels, rakes, and lawnmowers.
Ground stands can be quiet, but they can also be vulnerable to frost heaves when installed with poor drainage.
Wall mounts protect units from shovels, rakes, and lawnmowers; however, they can transmit sound within the unit.

Sizing

When it comes to sizing heat pumps, outdoor or indoor, more prominent isn’t always more effective. Smaller units are generally more efficient and do better work of cooling than larger ones.

Other Factors to Consider Before Installing a Heat Pump

Searching for the best heating repair near me online? Look no further than Premier Heating and Cooling.
There are other things to think about while installing the unit:

Line sets: Indoor units are connected to outdoor units via insulated copper lines. It is easiest to conceal the lines in a closet attic floor, basement ceiling, or even on an outside wall; however, sometimes, they can be concealed in an interior wall.
Condensate drain line: when indoor units operate in dehumidification or cooling mode, they condensate. It is then carried through the drain line. The water is drained into a sump hole, sewer line, or garden.
Code Requirements: Similar to most commercial and residential equipment installations, you should speak with the installer to ensure that you comply with the code. These rules can affect the installation cost.

If you are heating your home with a propane or natural gas furnace or a heat source, installing the heat pump is a fantastic method of reducing your home’s carbon footprint. If you are looking for a heat pump installation near me, call Premier Heating and Cooling at 270-904-3715 or drop us a mail.

ciwg_CEO@906